Crosswater Darby 15-15P-T, Installation Instructions, Page: 2 / 4

Installation Instructions
15123128 2
Set the handle in the desired off
position and place handle assembly
on the valve. Rotate clockwise
securing the handle assembly and
escutcheon to the wall and engaging
the stem.
- If all functions smoothly go to step
#15
.
- If the handle assembly will not
engage the stem, go to step #4.
- If the handle assembly will not
bottom out on the escutcheon go to
step #10.
3
15123128 3
2
Carefully slide the escutcheon on
valve.
If the handle assembly will
not engage the stem,
remove the handle assembly.
4
5
a
）
Add the threaded nipple and pressure balance
stem extensions supplied with trim.
b) Set the handle in the desired off position and place
the handle assembly on the valve and rotate clockwise
securing the assembly and escutcheon, engage to the
wall and the stem.
- If all functions smoothly go to step # 15
- If the handle assembly will not bottom out on the
HVFXWFKHRQJRWRVWHS
Cut stem and nipple extensions the
DPRXQWQRWHGLQVWHS1HYHU
cut the stem and nipple while still on
the valve. This may damage the
valve.)
Remove the handle assembly, nipple
and stem extensions.
Re-install the nipple, stem extension
and handle assembly.Go to step
# 15.
Measure and note the
distance ‘YY’(the distance
between the bottom of the
handle assembly and the
escutcheon).
8
6
7
b
1
Remove the mud guard.
Replacement Parts
Cleaning Instructions
Ɣ2QO\XVHDVRIWGDPSHQHGVSRQJHRUFORWKWRFOHDQDQGSROLVKWKHIL[WXUH
Ɣ:LSHIL[WXUHVDQGWKHLPPHGLDWHDUHDVFOHDQDQGULQVHFRPSOHWHO\ZLWKZDWHULPPHGLDWHO\DIWHULQVWDOODWLRQDQGDIWHU
applying any cleaner.
Ɣ,I\RXDUHXVLQJDFOHDQLQJFRPSRXQGRQRUFORVHWRWKHSURGXFWSOHDVHWHVWWKHFRPSRXQGRQDKLGGHQDUHDRIWKH
trim to ensure it will not damage the finish.
Ɣ'RQRWDOORZFOHDQHUVWRVRDNDQ\ZKHUHRQWKHSURGXFW
NO. ' escription Part No.
1 7KUHDGHG1LSSOH([WHQVLRQ
5P0C0582NT
5T1C0319NT
9Q248500
2
3 3UHVVXUH%DODQFH6WHP([WHQVLRQ
Handle Assembly
1
2
3
11
Remove the handle and escutcheon
assembly, the plate, stem and nipple.
If handle assembly will not bottom
out the escutcheon to the wall,
measure and note the distance
‘XX’(the distance between the
bottom of the handle assembly
and the escutcheon)
Cut stem and nipple the amount
noted in step # 10. (Never cut the
stem and nipple while still on the
valve. This may damage the valve.)
12
13
Re-install the trimmed stem and
nipple on the valve.
Place escutcheon on valve. Thread
on handle assembly to secure
escutcheon.
a
}
b
b
a
10
14
a
9
a
Installation Complete.
15
15-15P-T