11-02
-T
11-02-T-PC
11-02-T-SN
11-02-T-PN
11-02-T-BZ
Installation Instructions
15121412-A
2
15121412-A
3
Replacement Parts
NO. Description
Part NO.
1
Washer, Key and Aerator
9Q1110PL
2
Handle Assembly(cold)
9Q1125
3
Handle Assembly(hot)
9Q1124
4
Set Screw & Allen Key
9Q1350NT
2
1
4
3
Ɣ
Only use a soft, dampened sponge or cloth to clean and polish the fixture.
Ɣ
Wipe fixtures and the immediate areas clean and rinse completely with water immediately after installation and after
applying any cleaner.
Ɣ
If you are using a cleaning compound on or close to the product, please test the compound on a hidden area of the
trim to ensure it will not damage the finish.
Ɣ
Do not allow cleaners to soak anywhere on the product.
Cleaning Instructions
1
2
3
Remove the mud guards from the
spout nipple assembly, the hot and
cold valves.
4
Place the spout washer under the
spout and install spout on spout
nipple assembly. Be sure the spout is
firmly resting on the deck and secure
the spout. Secure the spout with the
setscrew.
Place the “O” ring over the cold valve.
Align the handle and place the handle
and escutcheon assembly into the
valve. Secure the assembly by turning
the escutcheon clockwise. Repeat for
hot valve.
Turn water supply on.
5
Remove the aerator with the supplied
key. Turn the faucet handles on full
for one minute to flush debris.
6
Re-install the aerator with key.
7
Installation complete.
