HAND
LE
HAND
LE
COVER CAPS
SCREW
THERMOSTATIC
CARTRIDGE
Replacement part
US-WLBGEXPVLVCAR
LOCKING
NUT
STOP
RING
BRASS
RING
VALVE
COVER
HAND
LE
HAND
LE
COVER CAPS
SCREW
SET
SCREW
The 1” concealed thermostatic valve should give trouble
-
free
service
however
servicing is a straightforward process.
To remove the thermostatic cartridge
Gently unscrew the cover cap from the handwheel.
Undo the long screw and dissasemble the parts as shown.
Undo the cartridge locking nut, (take note of the orientation of the
cartridge).
Pull the cartridge out of the mixer housing.
Wash the cartridge with clean running water and make sure that
any trapped debris has been removed.
Dry and lightly grease the seals, (only use silicone grease), and
replace the cartridge.
Re-assemble all parts.
9
Cleaning Instructions
Rinse away any traces of soap and gently dry with a clean, soft cloth after each use. Rinse completely with water and dry any overspray. This will
maintain the finish and avoid water spotting.
To remove mineral deposits, use a 50/50 solution of white vinegar and water. Do not allow the solution to soak on the product. Simichrome
Polish® contains a protective film to enhance maintenance and is helpful in preventing water spot buildup. Follow instructions to ensure
optimum results.
Never use an abrasive material such as a brush or scouring pad to clean the surface. The use of abrasive cleaners, cleansers or disinfectants will
alter the surface finish and void the warranty.
Do not allow certain materials such as toothpaste, cologne, shaving cream, nail polish remover, vinegar, wine, drain and glass cleaners to
remain on the surface. Prolonged contact will alter surface finishes and void the warranty.
We DO NOT recommend using any household cleaners as many can cause damage to the finish.
Please see the website for care instructions for specific finishes.
Maintenance for thermostatic valve US-ARC1000EV
NOTE:
To avoid damage, please remove all
plated
parts before
maintenance takes place.
Thermostatic
cartridges