Installation - pedestal
Installation
Please make sure you have the correct basin suitable for
the
pedestal. US-ARC1
suits
US-ARC600/900 Basins.
Place the basin in position, against the wall and sitting on top of
the pedestal.
locations on the wall, then proceed to drill.
Please refer to the installation guide that came with the basin.
Issue date:
102019
Warranty
-
This
Crosswater London
product is covered by a limited lifetime warranty. For full details, terms and conditions please visit our website.
For further information contact
:
Crosswater London
, 393 Fortune Blvd., Milford, MA 01757
Toll free number: 844-XWATER-1 (844-992-8371) tel: 508-381-0433 fax: 508-381-6068
www.crosswater
london
.com
email: technical@crosswater
london
.com
The installation process is the same no matter which basin is being installed. US-ARC600 is shown for illustration purposes only.
Cleaning Instructions
CARE OF VITREOUS CHINA AND FIRECLAY
A simple routine of regular care will keep your vitreous china and fireclay products clean and fresh.
Rinse away any traces of soap and gently dry with a clean soft cloth after each use. A mild detergent, warm water and a soft
cloth will remove normal dirt and soap accumulations from surfaces.
Soft abrasive cleaners may be used on vitreous china and fireclay. Never use abrasive cleaners without water. Do not use
caustic cleaners or disinfectants as they can alter the surface finish and void the warranty.
Do not allow certain materials such as toothpaste, cologne, shaving cream, nail polish remover, vinegar, wine, drain and glass
cleaners to remain on the surface. Prolonged contact can alter surface finishes and void the warranty.
CARE OF METAL
Rinse away any traces of soap and gently dry with a clean, soft cloth after each use. Rinse completely with water and dry any
overspray. This will maintain the finish and avoid water spotting.
To remove mineral deposits, use a 50/50 solution of white vinegar and water. Do not allow the solution to soak on the
product.
Simichrome Polish® contains a protective film to enhance maintenance and is helpful in preventing water spot buildup.
Follow instructions to ensure optimum results.
Never use an abrasive material such as a brush or scouring pad to clean the surface. The use of abrasive cleaners, cleansers or
disinfectants will alter the surface finish and void the warranty.
Do not allow certain materials such as toothpaste, cologne, shaving cream, nail polish remover, vinegar, wine, drain and
glass cleaners to remain on the surface. Prolonged contact will alter surface finishes and void the warranty.
We DO NOT recommend using any household cleaners as many can cause damage to the finish.