Loop Recording:
The cam will cyclically record new videos under the time interval
you set. Off / three minutes / five minutes / ten minutes. Default value: three minutes
Display Mode:
Picture in picture/ front camera/ back camera/ split-screen. Default
value: Picture in picture.
After rear camera is connected, this function is used to switch between different
screen display of front and rear cameras.
WDR:
off/on. Default value: off.
Used to adjust the brightness of the video clips. Suitable for situations like low light
or back light.
Exposure:
+3, +2, +1, 0, -1, -2, 3. Default value: 0.
Motion detection:
on/off. Default value: off.
It starts recording once it detects moving subjects within 3 meters in front of the lens,
otherwise it stops recording. It automatically starts recording 10s video and stops
recording after no dynamic motion appears.
Record audio:
Choose to record audio or not in the video. On/off. Default value: on.
Date stamp:
on/off. Default value: on. Date and time will be displayed on recorded
video.
G-
sensor:
Off/ Low / Medium / High. Default value: Medium.
The cam automatically locks video that is being recorded once it detects shaking or
collision. Files that are locked won
’
t be overwritten/ covered.
Parking Monitoring:
off/on. Default value:off.
After turning on Parking Monitoring, the cam will automatically starts recording
about 30 seconds video once it detects external force and then turn itself off if there is
no external force. The premise is that you need to hardwire it with car battery.
System Settings:
After being powered on, it enters video mode and automatically starts recording.
Short press OK Button to stop recording. Short press Menu Button to switch to video
recording settings. Short press Menu Button again to switch to system settings. The
screen displays the settings such as: Date/time, Auto Power Off, Beep Sound,
Language, Frequency, Screensaver, License Plate Number, Screen Rotation, Format,
Default Setting, Version.
Operation:
