P9 – Variable Time program – can be set from 10 min. to 180 min. drying time and can be operated on
the full heat, half heat or cool setting. To return from a time program to the main menu, press the Reset
button.
All programs from P1 to P9 can be used with the Delay Start feature. A maximum of 9 hours delay time
is available in 1 hour increments.
The anti-crease function can be selected to minimize creasing by continuing to turn the drum periodically
after the main drying cycle has finished.
PREPARATION
Check care labels inside the garments
.
CARE LABELS YOU MAY FIND ON YOUR FABRICS
Do not tumble dry woollen or wool mixture articles unless the article is labelled as being suitable. This
should avoid shrinkage.
Place delicate articles, e.g. tights, scarves, inside a pillowcase.
To avoid the need to iron easy-care polyester/cotton items it is better to only dry small loads (i.e. half fill
drum). It is better to dry small and large articles together.
Fabric softeners, or similar products, should be used as specified by the Fabric Softener instructions. Do
not overload the dryer or dry large bulky items such as duvets or sleeping bags as it is important that the
airflow through the dryer is not obstructed.
Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot
removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of
detergent before being dried in the tumble dryer.
Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber-backed articles and
clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer.
OPERATION
Open the door.
Load clothes loosely into the drum. Load sheets first, starting with one corner.
Close the door.
Dry your hands.
Plug in the machine and press the Activate button. The Display Window will illuminate. If no further
buttons are pressed, the display will go into sleep mode after 1 minute. To reactivate, press the Activate
button.
The dryer will automatically remember the program and heat setting last used. To change the program
use the (-) or (+) buttons on either side of the display window. Change the heat setting if required.
