SPECS AND DIMENSIONS
WIRING
Always choose speaker wire wisely. Make sure that the wire is appropriate for the speaker you are applying it to. It is highly recom-
mended not to use anything smaller than 16awg, consult your dealer. As with the power wires, use caution around sharp corners
or body parts that may easily cut through the insulation on the wire. If running into the doors, it is important to use a protective
boot in the door jam to protect the wire from being pinched as well as keeping water or moisture from entering the vehicle. Use
the factory boots whenever possible. And always make sure the wire is out of the way of the window track. To connect the wire to
the speaker, strip off approximately 1/2” inch (12mm) of the insulation and terminate the wires using insulated speaker terminals
(not supplied) or by soldering the connection to the loudspeaker. Be sure that the polarity at the loudspeaker is correct.
Model:
c5 572
c5 693
c5 x6
2 Way
5”x7” / 157x178m
m
N/A
.75” / 19mm
4 Ohm
75 Watts
150 Watts
90
70 - 20k
5” x 7.2” / 129 x 183mm
2.4” / 61mm
.08” / 2mm
NO
Neodymium
Silk
Glass / Carbon Fiber Cone
Butyl
3 Way
6”x9” / 152x229mm
2.5“ / 63.5m
m
.05” / 13m
m
4 Ohm
75 Watts
150 Watts
92
50 - 20k
5.9” x 8.7” / 150 x 220mm
3.2” / 81m
m
.35” / 9m
m
YES
Neodymium
Mylar
Glass / Carbon Fiber Cone
Butyl
2 Way - Component
6.5” / 165m
m
N/A
1” / 25mm
4 Ohm
75 Watts
150 Watts
90
60 - 20k
5.7” / 145m
m
2.4” / 61mm
N/A
YES
Neodymium
Silk
Glass / Carbon Fiber Cone
Butyl
