84-001970-01 Rev. 3.2
EZ-KIT Lite
Quick Start Guide
Thank you for purchasing this EZ-KIT Lite
evaluation system. Before you begin to use your EZ-KIT
Lite, you must first perform the following procedure, which leads you through the
software installation
and
hardware setup
.
For further information, please refer to the
EZ-KIT Lite Evaluation System Manual
on the CD-ROM.
Software Installation
1) Check the contents of your package and identify the following items:
•
Installation Quick Reference Card for Vi+ Development Environment
•
Vi+
development environment CD-ROM (CD includes the
EZ-KIT Lite
evaluation
system software)
•
EZ-KIT Lite board
•
Power supply
-
9V DC for ADSP-2181
-
7.5V DC for ADSP-2189 and SHARC DSPs
•
RS-232 serial port 9-pin cable
•
Registration form (to be filled out and returned to Analog Devices)
2) Ensure that your PC meets the following minimal requirements along with the requirements stated
in the Installation Quick Reference Card for Vi+:
Windows® 98, ME, 2000, XP, or Windows NT
An available RS-232 port
3) Ensure that the Vi+ Development Environment is installed.
a. If the latest version of Vi+ is installed, insert the Vi+ CD into CD-
ROM drive. Click on Install Vi+. Click on Install Tools. On this prompt screen,
select Modify to add the EZ-KIT Lite software. On the next Component prompt screen
make your EZ-KIT Lite selection and begin install.
b. If Vi+ is not installed please refer to the
Installation Quick Reference Card for
Vi+ Development Environment for further instructions.
Perform only tasks 1
and 2
. Continue after you have completed the Vi+ install.
Important:
Please note that installing the latest version of Vi+ will completely replace
the older Vi+
versions on your computer, making them inoperable. If for some reason,
you need to use the older version you will need to uninstall this version and re-install the older
version.
Note:
The Vi+ serial number shipped with this EZ-KIT Lite evaluation system creates a
permanent license, but
limits
the software’s capability. For detailed information on these limitations
refer to the
EZ-KIT Lite Restrictions
section in the
EZ-KIT Lite Evaluation System Manual
.
www.BDTIC.com/ADI
