crosscontrol CrossCore XA Programmer'S Manual Download

Page: 39 / 50

CrossCore XA

Revision: 1.0

Programmers Guide

Date: Jul 1, 10

7.3.1.

open

Description

Opens the front LED device. The call will return a file descriptor used in subsequent calls such as
write() or close().

Include files

#include <fctnl.h>

Syntax

int open(
const char *pathname,
int flags
)

Parameters

pathname

Path to the device file

flags

Parameter flag must include one of the following access modes: O_RDONLY,
O_WRONLY or O_RDWR

Return value

The new file descriptor if successful. In case of errors, -1 is returned and errno is set appropriately.

Example

See example of write.

7.3.2.

Description

Closes the file descriptor.

Include files

#include <unistd.h>

Syntax

int close(
int fd
)

Parameters

fd File

descriptor

Return value

Returns zero on success. In case of errors, -1 is returned and errno is set appropriately.

Example

See example of write.

www.crosscontrol.com

Summary of Contents for CrossCore XA



















































Search results

Summary of Contents for CrossCore XA

Reviews:

Related manuals for CrossCore XA

Brands by name

Popular brands

crosscontrol CrossCore XA, Programmer'S Manual

Search results

Summary of Contents for CrossCore XA

Reviews:

Related manuals for CrossCore XA

Brands by name

Popular brands