14
Removing the battery
Make sure your phone is powered off to avoid the important
information getting lost.
Hold battery bottom and remove the battery from the phone.
Charging the battery
New batteries are shipped partially charged. Before you can
use your phone, you need to charge the battery. Some
batteries will have best performance after several full
charge/discharge cycles.
1.
Connect data cable and charger, plug one end into your
phone’s data port.
2.
Plug the other end of the charger into the appropriate
electrical outlet (100~240V AC).
3.
When your phone indicates that the battery is fully
charged, remove the charger.
Notes:
1. Before charge, make sure the battery is installed in the
phone.
2. The battery can discharge gradually even when your
phone is powered off. If the battery is drained for a long
time, the information stored in the phone could possibly be
lost. So even you don’t need to use your phone for a long
period, you should charge the battery some times to keep
Summary of Contents for TREKKER-X1
Page 1: ...1 ...