2.5.4 Frequency Changes
At any time during the modification process, if you have made a mistake and do not wish to save the changes
you have made, scroll to “
R
” and push the Menu/Execute switch and select “
NO
” in the “
SAVE SETTINGS?
”
menu.
To change the FREQUENCY:
Operate the Menu/Execute switch until you get to the menu item you want to change (see Figure 2.4 for
the sequence of menu options). The following display is for changing the upconverter frequency:
U F=6850.000 G=+00
D F=4600.000 G=+30
Pressing the Up/Down switch down will toggle the frequency (the Downconverter frequency will track
linearly with the Upconverter frequency) to:
UP F= 6850.000
DN F= 4600.000
R
By using the horizontal rocker switch the cursor can be moved left or right.
U F=6850.000 G=+00
D F=4600.000 G=+30
NOTE: CHANGES DO NOT TAKE PLACE ON FREQUENCY UNTIL YOU GO TO THE SAVE
MENU AND INDICATE YOU WANT TO SAVE THE CHANGES.
When the display indicates the value desired you can push the Menu/Execute switch to the next item:
UP INLVL= -20
R
NOTE: CHANGES DO NOT CHANGE OR GET SAVED UNTIL YOU GO TO THE SAVE MENU
AND INDICATE YOU WANT TO SAVE THE CHANGES.
OR you can scroll to “R”, push the Menu/Execute switch to get to:
SAVE SETTINGS?
Y N
Selecting Y will save the new settings. Selecting N will revert to the previous settings.
Pushing the Menu/Execute switch then takes you to the :
U F=6850.000 G=+00
D F=4600.000 G=+30
Figure 2.4 shows all the menu items and how to make changes.
2017-74 Manual, Rev. B
Page 15
10/27/10
