Cross Tools CPG 3000 V, Translation Of Original Operating Instructions, Page: 22 / 108

Translation of the original operating instructions
1
Dear customer,
Congratulation for buying your new device from Cross Tools!
Like all our products, this one, too, was developed using the latest technological knowledge.
The device was manufactured and assembled on the basis of state-of-the-art pump technol-
ogy using most reliable electrical or electronic components which ensure a high level of
quality and a long life of your new product. Please read through these operating instructions
carefully to make sure that you can fully benefit from all features. Some explanatory illustra-
tions can be found at the end of these operating instructions.
We hope you will enjoy your new device!
Please read through these operating instructions carefully and make yourself conversant with
the control elements and the proper use of this product. We shall not be liable in the case of
damage caused as a result of the nonobservance of instructions and provisions of the pre-
sent operating instructions. Any damage caused as a result of the nonobservance of the in-
structions and regulations contained in the present operating instructions shall not be cov-
ered by the warranty terms. Please keep these operating instructions in a safe place and
hand them on together with the device should you ever dispose of it.
List of Contents
1. Device description .......................................................................................................................................... 1
2. Scope of delivery ........................................................................................................................................... 2
3. Technical Data ............................................................................................................................................... 2
4. Safety information .......................................................................................................................................... 3
5. Assembly instructions .................................................................................................................................... 8
6. Putting into operation ..................................................................................................................................... 8
7. Maintenance and cleaning ........................................................................................................................... 12
8. Transport and storage .................................................................................................................................. 14
9. Troubleshooting ........................................................................................................................................... 15
10. Warranty ...................................................................................................................................................... 16
11. How to order spare parts .............................................................................................................................. 17
12. Service ......................................................................................................................................................... 17
1. Device description
1. Transport handle
2. Tank cap
3. Valves
4. Oil dipstick
5. Oil filling port
6. Pull-cord starter
7. Fuel cock
8. Choke lever
9. Starter switch
10. Main switch / safety switch
11. Earth connection
12. Ignition key switch
13. Voltmeter
14. Type plate
15. Oil filler screw
16. Fuel display
17. Fuel filter
18. Oil drain screw
19. Cover spring clips
20. Air filter
21. Spark plug wrench
22. Spark plug cap
23. Spark plug
24. Rubber seal
25. Filter chamber
26. Carburettor
27. Drain screw
Numbers 15 to 27 will be discussed later on in these
operating instructions!
20