1.2 Technical Characteristics
(Technical characteristics continued on page 5...)
4116-21T23 Manual, Rev. B
Page 4
09/24/15
+10 dBm, maximum gain
Output 1 dB Compression
± 0.05 ppm maximum over temp internal reference; external reference input
Frequency Accuracy
-60 to 0 dBm
Output Gain Adjustment
SIGNAL RELATED <-50 typical, -45 minimum dBc; SIGNAL INDEPENDENT,
<-60 dBm, 2.20-2.30 GHz, maximum gain
Spurious, Inband
TABLE 1.0
4116-21T23 Translator Specifications**
Input = +2 to +8 dBm in. Monitor Output = Input Level ± 1.0 dB, 50
Ω
10 MHz Level In/Mon
None; Fixed Translation
LO Step Size
LO Characteristics
Non-inverting
Frequency Sense
±1.5 dB, over RF band; ± 0.5 dB, 40 MHz BW
Frequency Response
<-50 dBc for two carriers at 4 MHz spacing, each at -5 dBm out, maximum gain
Intermodulation
<-50 dBm spurious, signal independent; 1.0-2.19 and 2.31-3.0 GHz out, max. gain
Spurious, Out of Band
> 45 dB, minimum, at +0 dB gain
Input to Output Isolation
4±2 dB maximum, (+0 to -60 dB variable in 1±1 dB steps)
Gain at Fc
Channel Characteristics
>50 dB @ 0 dBm Output
Mute
2.20 to 2.30 GHz
Frequency
50
Ω
/ 14 dB, Mute & UnMute
Impedance/Return Loss
Output Characteristics
-30 to 0 dBm
Input Level Range
24 dB at maximum gain
Noise Figure, Maximum
2.02 to 2.12 GHz
Frequency
50
Ω
/14 dB
Input Impedance/Return Loss
Input Characteristics
Green LED
Power
Gain and internal 10MHz frequency via Ethernet M&C or Status/Control Connector
Gain, 10M Frequency
Red LED, External Contact Closure
PLL Alarm
Controls, Indicators
-110
-95
-80
-70
-70
1 MHz
100 kHz
10 kHz
1 kHz
100
dBC/Hz
Phase Noise @ F (Hz) >
