1.2 Technical Characteristics
TABLE 1.0 2083-2215 Dual Frequency Translator Specifications*
EQUIPMENT SPECIFICATIONS*
Input Characteristics
Input Impedance/RL
75
Ω
/12 dB
Frequency,
1.725-2.175 GHz
Input Level
-10 to -30 dBm
Input 1 dB compression
0 dBm
Output Characteristics
Impedance/RL
75
Ω
/12 dB
Output 1 dB compression
0 dBm
Output Level, Range
-10 to -30 dBm
Frequency
0.95-1.4 GHz
Channel Characteristics
Gain at band center
0 dB ±2 dB, fixed
Frequency Response
±1.5 dB, 0.95-1.4 GHz out; ± 0.7 dB, any 36 MHz increment
Frequency Sense
Inverting (1.725 GHz Translates to 1.4 GHz, 2.175 GHz
Translates to 0.95 GHz)
Intermodulation
<-50 dBC for two carriers each at -13 dBm out
Spurious Response
<-40 dBC, for 1.725-2.175 GHz input to 0.95 to 1.4 GHz out
0.95-1.4 GHz Feedthru <-30 dBC, min, <-40 dBC, goal
1.725-2.2 GHz Feedthru <-10 dBC, min, <-20 dBC, goal
LO rejection <-40 dBm, LO at the output
Synthesizer Characteristics
LO Frequency
3.125 GHz
Frequency Accuracy
± 1.0 ppm max
-110
-95
-80
-80
-70
1MHz
100kHz
10kHz
1kHz
100 Hz
dBC/Hz
Phase Noise @ Freq
Indicators
DC Power; PLL Alarm
Green LED; Red LED
Other
Connectors
RF in and RF Out, BNC, female, 75 ohm
Connector, Alarm
DB9 - NO or NC contact closure on Alarm
Size
19 inch, 1RU standard chassis 1.75”H X 16.0”D
Power
100-240 ± 10% VAC, 47-63 Hz, 15 watts max
*+10˚C to +40˚C; Specifications subject to change without notice
2083-2215 Manual- Rev B
Page 4
9/08/09
