2.5.4 Frequency Changes
At any time during the modification process, if you have made a mistake and do not wish to save the changes
you have made, do not press the Menu/Execute switch; simply do nothing for approximately 12
seconds, and the system will return to the normal operating mode or scroll to “R” and push the
menu/Execute switch and select “NO” in the “SAVE SETTINGS?” window.
To change the FREQUENCY:
Operate the Menu/Execute switch until you get to the menu item you want to change see Figure 2.4 for
the sequence of menu options. The following display is for changing the upconverter frequency:
F R E Q = 1 4 5 0 R
Pressing the Up/Down switch down will toggle the display to:
F R E Q = 1 3 5 0 R
By using the horizontal rocker switch the cursor can be moved left or right .
F R E Q = 1 3 5 0 R
NOTE: CHANGES DO NOT TAKE PLACE ON FREQUENCY UNTIL YOU GO TO THE
SAVE MENU AND INDICATE YOU WANT TO SAVE THE CHANGES.THE CARRIER IS
MUTED WHEN FREQUENCY IS CHANGED.
When the display indicates the value desired you can push the Menu/Execute switch to the next item:
U P I N L V L = - 2 0 R
OR you can scroll to “R”, push the Menu/Execute switch to get to:
S A V E S E T T I N G S ? Y N
Selecting Y will save the new settings. Selecting N will revert to the previous settings.
Pushing the Menu/Execute switch then takes you to the :
F = 13 5 0 G = + 1 0
Figure 2.4 gives the menu items and how to make changes
2015-05 Manual, Rev F
Page 15
05/20/10
