Cross Technologies 1599-10, Instruction Manual, Page: 11 / 17

Data Byte Output Noise Level (dB-Hz)
500 50.0
501 50.1
502 50.2
. .
. .
900 90.0
The instruction byte to set preset levels is ABH. This byte must be followed by a data byte that selects one of 10
possible preset levels. The following list describes the relationship between data bytes and output frequencies.
Data Byte Preset Level
00 0
01 1
. .
. .
09 9
The instruction byte to turn the test carrier on and off is ACH. This byte must be followed by a data byte as
follows:
Data Byte Test Carrier Condition
01 Carrier On
02 Carrier Off
The instruction byte to terminate carrier or noise the is ADH. This byte must be followed by a data byte as
follows:
Data Byte Test Carrier Condition
01 Terminate Noise
02 Operate
03 Terminate Carrier
1599-10 Manual, Rev. A Page 11 01/07/10