Cross point XM3 MICROPROXS, Manual

Page: 24 / 86

24 Manual XM3 Remote Programmer: Version 4.1
3.4 - (De)Activate Night time mode
The Night time mode is a special mode in which the normal tags are denied
access.
The Night time triggers output I/O4, intended for external control, e.g. to
switch on an external alarm system or to control the mains for lighting or for
other electrical devices. Night time mode can be switched on and off by any
Remote Programmer and/or via an external control through I/O2.
In Night time mode, a User level Remote Programmer can be used to obtain
access, while switching the XM3
to Access mode, just like a Night time
Master.
Activate Night time mode using any Remote Programmer:
Step Action Result
1 Present Remote Programmer Program mode entered
2 Activate “Night time”-mode I/O4 activated
Deactivate Night time mode using an Installer Programmer:
Step Action Result
1 Present Remote Programmer Program mode entered
2 Deactivate “Night time”-mode I/O4 deactivated
XM3 resumes normal
operation
Deactivate Night time mode using a User Programmer:
Step Action Result
1 Present Remote Programmer Program mode entered
2 Close “Night time”-mode I/O4 deactivated
Relay activated
XM3 resumes normal
operation