CD Player
Programmed CD Playback
Getting Started
Control Locators.................
4,5
Unpacking...........................
6
Power Source.....................
6
Basic Operation
Light / Bubble Tubes...........
7
Remote Control...................
7
FM Stereo Operation..........
7
Connecting Optional Equipment
External Speakers.................... 7
Auxiliary Inputs......................... 7
CD Operation
CD Player............................
8
Programmed CD Playback..
8
General
Troubleshooting Guide........
9
Warranty...............................
10
Thank you for purchasing the the Crosley Mini
Bubbler Jukebox with CD (WR18). Before operating
this unit, please read this manual thoroughly and
retain it for future reference.
Instuctions in this manual describe the control
functions of the WR18.
8
About This Manual
Welcome
Table of Contents
1
Make sure the power is on.
2
Push CD / RADIO BUTTON (25). The CD
display will show (- -).
3
Push OPEN / CLOSE BUTTON (27) on remote
to open CD DRAWER (12) .
4
Insert CD in tray with the label side of CD
facing up.
5
Push the OPEN / CLOSE BUTTON (27) again
to close the CD DRAWER (12).
6
Push PLAY / PAUSE BUTTON (26) on remote
to begin playing the CD.
7
To stop playing, push the STOP BUTTON (22)
on remote.
8
To skip to different tracks, push the BACK
SKIP (21) or FORWARD SKIP BUTTON (29)
on the remote. The FORWARD SKIP BUTTON
(29) will go numerically through tracks forward
and the BACK SKIP BUTTON (21) will go
backwards.
9
By pressing and holding either the BACK SKIP
(21) or FORWARD SKIP BUTTON (29), you
can rewind or fast forward through each
individual tack. The track will fast forward or
rewind as long as you are holding the button.
Once you let off the button, regular playback
resumes.
10
During playback, you can use the REPEAT
BUTTON (23) to repeat an individual song or
the whole CD. While a song is playing, push
the REPEAT BUTTON (23) on the remote.
You will see the repeat light on the radio start
flashing. This means that once the song is
over, it will automatically start playing that song
again. Pushing the REPEAT BUTTON (23)
twice will make the repeat light come on without
flashing. When the whole CD is finished, it will
automatically start from the very beginning of
the CD and play it again. Pushing the REPEAT
BUTTON (23) once more will disable the repeat
function and CD will stop playing at the end
of the disc.
CD Operation
The CD player in this unit is programmable. This
means you can program it to play only selected
tracks on the selected CD.
Follow instruction below to program the CD player.
1
Insert disc and close CD DRAWER (12). Do
not push play yet.
2
Push the PROGRAM BUTTON (24) on the
remote. The program light on the radio will
start flashing.
3
Use the BACK SKIP (21) or FORWARD SKIP
BUTTON (29) to select a track you want to
program.
4
Once you have selected a track, push the
program button again. This stores the track
into memory.
5
Use the BACK SKIP (21) or FORWARD SKIP
BUTTON (29) to select the next track you want
to program. Once selected, push the program
button again.
6
Repeat step number 5 until you have
programmed all desired tracks.
7
Push PLAY / PAUSE BUTTON (26) to begin
playing the selected tracks. The program light
will stop flashing and the selected tracks will
begin playing. They will play in the order that
they were programmed.
8
Using the BACK SKIP (21) or FORWARD
SKIP BUTTON (29) will only skip through the
programmed tracks.
9
To clear programmed tracks, push the stop
button on the remote control twice until the
program light goes out.
10
Programmed tracks will also be erased from
memory when the CD DRAWER (12) is opened
or when the power is turned off.
