1
Remove packing materials from unit.
Note:
Save all packing materials.
2
Remove plastic safety cover from A/C plug.
3
Remove tie from A/C cord
PA S S
C L A S S I C
R O C K
P O P
J A Z Z
1
Make sure the unit is plugged in correctly to an
AC outlet.
2
Press the POWER button to turn on the main
power. This button should be left pressed in even
when the unit is not in use. If the main power is
turned off, all preset radio stations will be lost
and will have to be reprogrammed.
3
Press the STAND BY button to turn on the
unit power. The STAND BY button should be
used to turn the unit on or off.
4
Once the Power is turned on, press the
FUNCTION button to switch between
Tuner/CD/iPod/Aux.
5
While listening to any of the above functions, you
may change the tone of the music by pressing
the EQ button. Each press of the EQ button will
toggle between the following settings:
6
You can also enhance the bass sounds by using
the BBS feature. Press the BBS button to turn
this feature on.
General
Basic Operation
Unpacking
1
Unwind the AC POWER CORD at the back
of the unit and connect it to a power outlet.
2
Plug A/C cord into appropriate outlet.
3
Install 2 AAA batteries (not included) in
remote control.
4
Plug A/C cord into appropriate outlet.
AC
Polarized Plug
Power Source
7
Control Locators
6
Run/Pause
BLUE (B)
DARK BLUE
BROWN
PINK
Increase BLUE
Decrease BLUE
DIY (adjustment of colour by the user)
SMOOTH: 3-colour slow colour change -adjustable
FADE: 7-colour slow colour change -adjustable
STROBE: Colour fade out & fade in -adjustable
7-colour fast colour change
Dimmer (Press and hold + 5 seconds)
WHITE (W)
LED LIGHTING CONTROL FUNCTION
To control the LED lighting use the Infra-red Remote Control handset, which has 28 buttons, the function
of each button is as in the table below:
Bri (8 in all)
RED (R)
ORANGE
DARK YELLOW
YELLOW
Increase RED
Decrease RED
Brightness- (8 in all)
GREEN (G)
LIGHT GREEN
BLUE
LIGHT BLUE
Increase GREEN
Decrease GREEN
(2) LIGHTING REMOTE CONTROL
DIY (adjustment of colour by the user)
3- colour slow colour change
7- colour fade change - adjustable
colour fade in & out - adjustable
7- colour fast colour change
Play/Pause
blue
dark blue
brown
Pink
Increase blue
Decrease blue
Dimmer
white
R
G
B
W
FLASH
STROBE
FADE
SMOOTH
DIY
Bri(8 in all)
red
orange
dark yellow
yellow
Increase red
Decrease red
Brightness-(8 in all)
green
light green
Static cyan
light blue
Increase green
Decrease green
Note: This product may be equipped with a
polaized alternating-current line plug (a
plug having one blade wider than the
other.) This plug will fit into the power
outlet only one way. This is a safety
feature. If you are unable to insert the plug
fully into the outlet try reversing the plug,
if the plug should still fail to fit, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose
of the polarized plug.
