9
CD Player
Programmed CD Playback
1
Make sure the power is on.
2
Press CD / iPod BUTTON (22). The CD
display (- -) will flash, then show (0 0) .
3
Press OPEN / CLOSE BUTTON (24) to open
CD DRAWER (11) .
4
Insert CD in tray with the label side of CD
facing up.
5
Press the OPEN / CLOSE BUTTON (24) again
to close the CD DRAWER (11).
6
Press PLAY / PAUSE BUTTON (23) to begin
playing the CD.
7
To stop playing, press the STOP BUTTON
(19).
8
To skip to a different track, press the BACK
SKIP (18) or the FORWARD SKIP (26) button.
9
By pressing and holding either the BACK SKIP
(18) or FORWARD SKIP BUTTON (26), you
can rewind or fast forward through each
individual tack. The track will fast forward or
rewind as long as you are holding the button.
Once you let off the button, regular playback
resumes.
10
During playback, you can use the repeat
function to repeat a single song or the whole
CD.
11
While the song you want to repeat is playing,
press the REPEAT (20) button once. You will
see the REPEAT INDICATOR (5) on the
jukebox start to flash. The song will start over
once it is finished.
12
Press the REPEAT (20) button a second time
to repeat the whole CD. The REPEAT
INDICATOR (5) will stay on without flashing.
13
Pressing the REPEAT (20) button a third time
will disable the repeat function.
CD Operation
This CD player is programmable which allows you
to program it to play only selected tracks. To program,
follow the steps below.
1
Insert disc and close CD DRAWER (11). Do
not press play yet.
2
Press the PROGRAM (21) button. The
PROGRAM INCICATOR (4) on the jukebox
will start to flash.
3
Use the BACK SKIP (18) or FORWARD SKIP
BUTTON (26) to select a track you want to
program.
4
Once you have selected a track, press the
program button again. This stores the track
into memory.
5
Use the BACK SKIP (18) or FORWARD SKIP
BUTTON (26) to select the next track you want
to program. Once selected, press the program
button again.
6
Repeat step number 5 until you have
programmed all desired tracks.
7
Press PLAY / PAUSE BUTTON (23) to begin
playing the selected tracks. The program light
will stop flashing and the selected tracks will
begin playing. They will play in the order that
they were programmed.
8
Using the BACK SKIP (18) or FORWARD
SKIP BUTTON (26) will only skip through the
programmed tracks.
9
To clear programmed tracks, press the stop
button twice until the program light goes out.
10
Programmed tracks will also be erased from
memory when the CD DRAWER (11) is opened
or when the power is turned off.
8
Using Your iJuke
Basic Operation
The iJuke features the Universal iPod Dock that
uses dock adapters that come with newer iPod
models. Before inserting your iPod, you will need
to install the correct dock adapter. By using the
correct dock adapter, you can insert any iPod with
a dock connector. While docked, the iJuke will also
charge your iPod. To connect your iPod, follow the
steps below.
1
Insert the correct dock adapter that fits your
iPod. Your iPod should fit snugly into the correct
adapter. Gently press the adapter until it snaps
firmly in place.
2
Connect your iPod as shown in the illustration
below.
3
Press the Power button to turn iJuke on.
4
Push CD / iPod BUTTON (22), to select the
iPod function
5
Browse your iPod for songs and press the
Play/Pause button. Your music should begin to
play.
6
Adjust the volume to your desired listening level.
7
To remove the dock adapter, push your fingernail
into the slot in the back of the adapter and lift
up.
Note:
When using the jukebox in iPod mode,
the remote control will only control the volume
and will not control the functions of your iPod.