CD Player
Programmed CD Playback
Getting Started
Control Locators.................
4,5
Unpacking...........................
6
Power Source.....................
6
Basic Operation
Light / Bubble Tubes...........
7
Remote Control...................
7
FM Stereo Operation..........
7
CD Operation
CD Player............................
8
Programmed CD Playback..
8
General
Troubleshooting Guide........
9
Warranty...............................
10
8
About This Manual
Thank you for purchasing the Crosley Elvis Presley
Jukebox With CD (EP18). Before operating this unit,
please read this manual thoroughly and retain it for
future reference.
Instuctions in this manual describe the control
functions of the EP18.
Welcome
Table of Contents
1
Make sure the power is on.
2
Push CD / Radio button. The CD display will
show (- -).
3
Push open / close button on remote to open
CD drawer.
4
Insert CD in tray with the label side of CD
facing up.
5
Push the open / close button again to close
the CD drawer.
6
Push play / pause button on remote to begin
playing the CD.
7
To stop playing, push the stop button on
remote.
8
To skip to different tracks, push the back skip
or forward skip button on the remote. The
forward skip button will go numerically through
tracks forward and the back skip button will
go backwards.
9
By pressing and holding either the back skip
or forward skip button, you can rewind or fast
forward through each individual tack. The
track will fast forward or rewind as long as you
are holding the button. Once you let off the
button, regular play back resumes.
10
During play back, you can use the repeat
button to repeat an individual song or the whole
CD. While a song is playing, push the repeat
button on the remote. You will see the repeat
light on the radio start flashing. This means
that once the song is over, it will automatically
start playing that song again. Pushing the
repeat button twice will make the repeat light
come on without flashing. When the whole CD
is finished, it will automatically start from the
very beginning of the CD and play it again.
Pushing the repeat button once more will
disable the repeat function and CD will stop
playing at the end of the disc.
CD Operation
The CD player in this unit is programmable. This
means you can program it to play only selected
tracks on the selected CD.
Follow instruction below to program the CD player.
1
Insert disc and close CD drawer. Do not push
play yet.
2
Push the program button on the remote. The
program light on the radio will start flashing.
3
Use the forward skip or back skip button to
select a track you want to program.
4
Once you have selected a track, push the
program button again. This stores the track
into memory.
5
Use the forward skip or back skip button to
select the next track you want to program.
Once selected, push the program button again.
6
Repeat step number 5 until you have
programmed all desired tracks.
7
Push play / pause button to begin playing the
selected tracks. The program light will stop
flashing and the selected tracks will begin
playing. They will play in the order that they
were programmed.
8
Using the forward skip and back skip buttons
will only skip through the programmed tracks.
9
To clear programmed tracks, push the stop
button on the remote control twice until the
program light goes out.
10
Programmed tracks will also be erased from
memory when the CD drawer is opened or
when the power is turned off.
