Crosley DANSETTE II BERMUDA CR6233D Instruction Manual Download Page 6

English

 

 

6.  Release the tonearm 

Hold Down Clip

Note: when the turntable is not in use, remember to lock back hold down clip. 

7.  Lift up the tonearm and move it over the record where play is desired to begin. 

Gently put down the tonearm and begin the playback. 

8.  When the record is finished playing, gently lift up the tone arm and move it 

back to the tonearm rest. 

9.  Lock the 

Tonearm Clip

 to secure the tonearm. 

 
 

Platter Auto-stop  

If the 

Auto-stop Sw

i

tch

 is set to ON position, the platter will stop spinning 

automatically when the record plays to the end. In some rare occasion, if the 
turntable stops playing before the end of the record, set the switch to OFF 
position the turntable should overcome this issue. 
 
 

Pitch Control 

The turntable speed can be increased or decreased by approximately 10% by 
rotating the Pitch Control Knob.  To increase the speed, turn the Pitch Control 
Knob clockwise.  To decrease the speed, turn the knob counter-clockwise. 
 
 

Needle Replacement 

Removing Needle 

1.  Gently pull down the front edge of the needle. 
2.  Pull needle forward. 
3.  Pull out and remove. 

 

 
Installing Needle 

1.  Position the needle with its tip facing down. 
2.  Line up the back of the needle with the cartridge. 
3.  Insert the needle with its front end at a downward angle and gently lift the 

front of the needle upward until it snaps into place. 

 

 

Summary of Contents for DANSETTE II BERMUDA CR6233D










Reviews: