background image

3

SET UP

DIAL MODE

The DIAL MODE switch is located at the bottom of the telephone. Slide the switch to TONE unless you have Dial-Pulse
(Rotary) telephone service in your area, in which case, slide the switch to the PULSE position.

RINGER CONTROL

The RINGER CONTROL switch on the bottom of the phone allows
you to turn the ringer on or off.

RECEIVER VOLUME

The RECEIVER VOLUME CONTROL switch, located on the bottom
of the phone, allows you to adjust the volume of the handset from
LOW to HI.

HANDSET CORD

To assemble, insert the end of the handset cord into the HANDSET
CORD JACK located on the back of the telephone body.

INSTALLATION

To connect the telephone, connect one end of the line cord to the
wall jack. Connect the other end to the LINE JACK on the back
of the phone.

MAKING AND ANSWERING CALLS

To get a dial tone or answer an incoming call, lift the handset.To
hang up, either replace the handset or press the HANDSET
SWITCH manually.To redial the last number, lift handset and press
the redial button.

TROUBLESHOOTING

If you experience problems with your telephone, try the following
suggestions:

NO DIAL TONE

1)  Make sure that all plugs are connected properly. Check the 

connections at the wall jack, the telephone cabinet and handset.

2)

Try another modular jack within your home which you know 
to be working properly.

CALLS CANNOT BE DIALED
OR DIALED SLOWLY

Check to make sure that the DIAL MODE switch is in the correct
position for the type of service (TONE/PAUSE) available in your
area.

TELEPHONE DOES NOT RING

Check that RINGER CONTROL switch is not set to OFF.If there
are several telephones connected to the same line,try disconnecting
some of the other telephones. Having too many telephones
connected to the same line can cause low ringer volume or poor
sound quality during calls.

CARE AND MAINTENANCE

Avoid rough treatment to the telephone. Do not drop the handset
and always place it gently back in the cradle.Clean only with slightly
dampened cloth. Do not use detergent, wax, solvent, spray, alcohol
or excessive water.

PARTS INCLUDED

Your new telephone includes the following items:
1 - Telephone handset with handset cord
1 - Telephone body
1 - 7 foot line cord

HANDSET CORD JACK

LINE CORD JACK

RINGER
OFF / ON

PULSE/
TONE

VOLUME
LOW / HI

PRESS FOR
FLASH

PRESS FOR
REDIAL

ENGLISH

Summary of Contents for CR59






Reviews: