background image

English

 

 

Safety Instructions 

Read and understand this entire manual before using this product. Keep these 
instructions for future reference. 
1.  Do not use this product near water.  
2.  This product should be operated only by the type of power source indicated 

on the marking label or in this instruction manual.  

3.  Do not defeat the safety purpose of the polarized plug. A polarized plug has 

two blades with one blade wider than the other. This plug will fit into the 
power outlet only one way. If you are unable to insert the plug fully into the 
outlet try reversing the plug. If the plug should still fail to fit, contact your 
electrician.  

4.  Protect the power cord from being walked on or pinched particularly at plugs, 

convenience receptacles, and the point where they exit from the product. 

5.  Do not overload wall outlets, extension cords, or integral convenience 

receptacles as this can result in a risk of fire or electric shock. 

6.  Never push objects of any kind into this product through openings as they 

may touch dangerous voltage points or short-out parts that could result in a 
fire or electric shock. Never spill liquid of any kind on the product. 

7.  Do not attempt to service this product yourself as opening or removing 

covers may expose you to dangerous voltage or other hazards. Refer all 
servicing to qualified service personnel. 

8.  Changes or modifications to this unit not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the 
equipment. 

9.  Do not use attachments not recommended by the product manufacturer as 

they may cause hazards. 

10.  A product and cart combination should be moved with care. Quick stops, 

excessive force, and uneven surfaces may cause the product and cart 
combination to overturn. 

11.  Slots and openings in the cabinet are provided for ventilation and to ensure 

reliable operation of the product and to protect it from overheating. Do not 
block or cover these openings.  

12.  Unplug the product during lightning storm or when unused for long periods of 

time. 

 

 

 

Summary of Contents for Coda











Reviews: