18
9) Bluetooth
Installing the Bluetooth receiver:
The Bluetooth receiver is an accessory and therefore may not be installed at the time of
purchase. No tools are required to install the Bluetooth receiver.
1. The audio cables (phono) and power connections are already installed. Upon delivery
these cables will be secured in the retaining clip as shown below in step 1.
2. Unclip these cables and plug each cable into the Bluetooth receiver as shown in step 2.
Insert the black and red plugs into the bluetooth receiver. The grey power cable pushes
into its socket and clips into place.
3. Remove the backing from the self adhesive tape on the back of the Bluetooth receiver
and attch to a blank area of the cabinet where there is room to remove the cables if
required.
1.
2.
3.
