Crosley CB-8500GW Instruction Manual Download Page 2

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

GROUNDING INSTRUCTIONS

This appliance must be grounded.  In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by
providing a path of least resistance for electric current.  This appliance is equipped with a cord having an equipment-grounding
conductor and a grounding plug.  The plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.

OPERATION INSTRUCTIONS

"WARNING - To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance."  This statement is omitted when the operating instructions are preceded by the safety instructions and are
included in the same manual.

Understanding your responsibilities when using the washer.

1. Do not use chlorine bleach ancd ammonida or acid(such as vingar or rust remover) in the same wash. Hazardous fumes can form.
2. Unplug power supply cord before attemping to service your washer.
3. Do not wash fiberglass material. small particles can stick to fabrics washed in following loads and cause skin irritation.
4. Do not spray water on the control panel of the washer. It could cause fire or an electric shock.
5. In case of the dual valve model, If you connect only cold water inlet valve, while water temperature is selected as hot or warm, there

can be water leakage form unconnected water inlet valve.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

WARNING!

For your safety, the information in this  manual  must be followed to minimize the risk of fire or explosion, electric shock, or to
prevent property damage, personal injury, or loss of life

WARNING! - To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions,

including the following :

1.  Read all instructions before using the appliance.
2.  Do not wash or dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning

solvents, other flammable or explosive substances as they give off vapors that could ignite or explode.

3.  Do not allow children to play on or in the appliance.  Close supervision of children is necessary when the appliance is used near

children.

4.  Before the appliance is removed from service or discarded, remove the door to the washing or drying compartment.
5.  Do not reach into the appliance if the drum is moving.
6.  Do not install or store this appliance where it will be exposed to the weather.
7.  Do not tamper with controls
8.  Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-

maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out.

9.  Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water.  These substances

give off vapors that could ignite or explode.

10. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more.

HYDROGEN GAS IS EXPLOSIVE.  If the hot water system has not been used for such a period, before using a washing machine
or combination washer-dryer, turn on all hot water faucets and let the water flow from each for several minutes.  
This will release any accumulated hydrogen gas.  As the gas is flammable, do not smoke or use an open flame during this time.

11. Keep area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt.
12. Do not place items exposed to cooking oils in your dryer.  Items contaminated with cooking oils may contribute to a chemical

reaction that could cause a load to catch fire

13. Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.
14. Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or

product.

WARNING! -  Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a

qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify
the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician

Summary of Contents for CB-8500GW

































Reviews: