English
9
Turntable Operation
1. Turn the Power Knob clockwise to turn on the power.
2. Set the
Speed Switch
accordingly.
3. Place the record on the turntable. Use the
45 RPM Adapter
if necessary.
4. Remove the stylus protector from the stylus assembly.
Note: To avoid stylus damage, make certain the included stylus guard is in place
whenever the turntable is being moved or cleaned.
5. Press the
Start/Stop Button
to start the turntable platter
’s rotation.
6. Release the tonearm
Hold Down Clip
.
Note: when the turntable is not in use, remember to lock back hold down clip.
7. Use the
Cue Lever
to lift up the tonearm.
8. Gently move the tonearm over the record where play is desired to begin. Set
the
Cue Lever
back to the down position, the tonearm will descend slowly
onto the record and begin to playback.
9. When the record is finished playing, use the
Cue Lever
again to raise the
tonearm and then return it to the
Tonearm Rest
. Release the lever to let the
tonearm sit back at its rest. To suspend the playback, repeat the same steps.
10. Lock the
Hold Down Clip
to secure the tonearm.
11. Press the Start/Stop Button again to stop the turntable platter
’s rotation. Turn
the Power Knob counter-clockwise to turn off the power.
Anti-skate Adjustment
A small outward “anti-skating” force can be applied to the tone arm to
compensate for the “skating” force that pulls the arm toward the center of the
record.
For best performance during normal turntable usage, it is recommended to
set the anti-skate control knob to the same value as indicated by the
downforce scale dial.
