background image

Antenna: for FM reception, the unit is provided with
a FM WIRE ANTENNA (31) , move the wire until
the reception is clear and with no interferences. For
AM reception, the unit is provided with a directional
build-in ferrite antenna. Rotate the set to find the
position in which the best reception is obtained. Do
not connect the FM WIRE ANTENNA (31) to any
outside antenna.

Antenna

Radio Operation

1

Rotate

 the FUNCTION SWITCH (18) to select

RADIO mode.

2

Press the AM/FM BUTTON (19) to the desired
radio band (AM   or FM   ).

3

Select the desired radio station by rotating
TUNING KNOB (20).

4

Adjust the VOLUME KNOB (4) to the desired
sound level.

Accessory: Adapter for 45 rpm

Adapter for 45 rpm

To play the 45 rpm record, place the adapter in the
center of record. This unit includes six adapters
found in the polybag of the instruction manual.

Turntable Operation

Control Locators

Unit Controls

5

Radio Operation

8

22

Turntable Suspension Screw

23

Center Spindle

24

Tension Arm

25

Tone Arm

26

Size Select Switch

27

Tone Arm Rest

28

Turntable Switch

29  Speed Select Switch
30

Turntable

31

FM Wire Antenna

32

AC Power Cord

22

23

24

25

26
27

29

30

28

32

31

Summary of Contents for Band Master 3-in-1 Entertainer CR86









Reviews: