10
Tick each box to affirm completion
1. Operator’s Manuals Supplied
WEED-IT User Manual
WEED-IT Parts Manual
Sprayer Operators Manual
Spray Rate Controller Manual
Safety Manual
Pump Manual
Calibration sheet
Boom parking quick start guide
MP-375 Transport kit sheet
Unloading guide
Other
2. Upon delivery, and if necessary, unloading and final
assembly, perform a thorough “pre-flight” inspection
of the sprayer, checking ….
Trailer / chassis / boom structure is undamaged and paint
in good order
Wheels & hubs greased, split pin and dust caps in place,
wheel nuts tight - (note if these items have a white mark, it
denotes checking at the factory)
Check tyre pressures
Check mudguards
Check all tanks are undamaged, tank lids open and seal shut
correctly. Basket strainer in place
Check for any loose fittings
Check camlock tethers
Identify & check all grease points
Check all filters are clean
Check all decals are in place
3. Connect to the Owner’s tractor
Confirm the tractor is suitable
Connect hitch & install safety chains or connect via linkage pickup’s
(version dependant).
Connect Pump Hydraulics – make sure the return is “to tank”
Connect boom hydraulics
Connect WEEDit controller(s), must connect to the tractor’s battery.
Tick each box to affirm completion
Connect spray rate controller
Connect fence line controller
4. Power up the Air systems (turn on the WEEDit controller).
Note it is essential that the air system is engaged before
the pump hydraulics
Check the air compressor is operating and comes up to pressure
/no leaks etc
Check and adjust axle airbag heights and PAV pressure regulator
5. Open the boom to spray position
Confirm boom hydraulics
Check and adjust boom docking
Check and adjust for correct WEEDit sensor heights.
Check hoses do not kink or jam whilst unfolding / folding
6. Fill all tanks with sufficient fresh water to enable checking
Confirm the fill and drain functions for all tanks.
Check & clean the fill filter
7. Check the operation of all spray functions
Hopper(s)
Probe, inc rinse
Agitators
Main tank rinse(s)
WEEDit spray operation – use a fresh green plant to check sensor
function
Blanket line operation (if fitted), including prime / recirc / flush
Fence-line nozzle function
Check and resolve nozzle blockages or leaks
8. Other checks (as applicable)
Ag Runner transfer system
Check & calibrate controller operation
Perform speed calibration (menu 207)
Check & clean all pressure filters
Check for hydraulic or spray system leaks
Drain tanks
DELIVERY CHECKLIST & CUSTOMER INDUCTION
This check list must be completed & signed by both the Owner and the Dealer, and the white copy returned by the Dealer to Croplands.
Prior to delivery to the dealer, this sprayer has undergone extensive checks and testing at the factory.
/ /
/ /
OWNER
Farmer
Contractor
Owner’s Name
(print)
Address
Postcode
Phone
Mobile
Email
Signature of Owner
Date
DEALER
Dealership Name
(print)
Address
Postcode
Email
Signature of Dealer Representative
Date
Machine Serial #
Top Copy (White) - Forward to Croplands;
Second Copy (Yellow) - Dealer’s Copy;
Third Copy (Blue) - Owner’s Copy
