Croplands SITREX FSP 100, Instruction Manual

Page: 6 / 42

6
YOU ARE ADVSED NOT TO:
. • load the hopper with wet products as these may clog the machine.
. • use the spreader to scatter stones or other dangerous materials.
. • dismantle safety devices and the covers protecting them.
. • transporting people is prohibited both while working and during transfers.
The fertilizer spreader must never be used by employees under the age of eighteen.
7
-ASSEMBLING THE FERTILIZER SPREADER
(Fig.5 )
A - Assemble shafts 3-4 and 5 on the transmission unit, with the same rotation direction as
shown in the drawing.
B - Fix the transmission unit 1 to the frame 2.
C - Fix the drawbar 6 to the frame 2.
D - Fix the tie-rod 7 and the casing P TO the frame 2.
E - Fit the disc 8 on the central transmission shaft.
F - Fix the fertilizer opening lever 9 to the bow on the frame 2.
G - Fit the space washer 10 on the unit axle .
H - Fix the wheels 11 to the unit axle.
I -Fit the agitator guide bushing 15 in the hopper cone, with the dosing disc, the sealing
washer and the snap ring. (N°12) .
L -Introduce the agitator 13 into the central hole in the hopper 14 and fix it to the shaft 5; fit
the casing 17 on the attachment holes of the hopper and fix the hopper to the frame 2.
M -Connect the opening tie-rod 16 to the dozer disc 8 and the opening lever 9.
8
- FUNCTIONING OF THE MACHINE
HITCHING
The machine can be attached to any type of self-propelled vehicle or tractor which is suffi-
ciently powerful.