CropCare LG40 Owner'S Manual Download Page 5

During Operation

Always be aware of bystanders, particularly children!

DO NOT 

allow passengers to ride on the equipment the sprayer is mounted on.

Be aware of dangerous terrain such as holes, slopes, drop-offs, banks, rocks, and hidden

hazards.  Operate the equipment and sprayer up and down slopes, not across.

Never leave running equipment unattended!

Remember that accidents can even happen to seasoned operators. Always take your time

and follow all safety instructions.

Following Operation

Always rinse the tank and flush the pump of all harmful chemical residue.

Store the sprayer away from human and livestock activity and in an area protected from

the elements.

Do not permit children to play on or around sprayer.

Pump Safety Precautions

Never pump flammable, explosive, petroleum-based, or any other non-compatible

products such as gasoline, fuel oil, kerosene, etc.

Such practices will void the

manufacturer's warranty.

DO NOT

allow the pump to get wet or to be exposed to the elements. Allowing the

pump to get wet or to be exposed to the elements voids the manufacturer's warranty.

Note:  The pump may be run dry for limited periods without resulting in damage.  

Never attempt to adjust the pressure of the pump. Any unapproved pump adjustment will

void the manufacturer's warranty.

Always disconnect the power to the pump when working on the pump. Failure to do this

could result in electrical shock.

Mounting the Sprayer

This spot sprayer is designed to be mounted on the rack of an ATV, on a garden trailer, or on a

utility vehicle such as a John Deere Gator

TM

. Mounting the sprayer correctly and securely will ensure

consistent and safe spraying.

Page 3

Summary of Contents for LG40

















Reviews: