Crommelins GTS1300, Operation & Instruction Manual

Page: 8 / 19

5
Every time you want to use the machine, check beforehand that machine is working
properly and replace any faulty or worn parts immediately.
Check the following before every use:
Loose bolts and nuts
Damaged rubber flaps in the input tube – change them if they are damaged or
worn
Oil level in the engine
Cracks in the plating and/or failed welding
Cracked or damaged wiring
Be sure the chipper has been maintained properly. Damage or harm caused using faulty,
worn or not original parts are not within the manufacturer’s responsibility.
Keep your face and body as far as possible from the input tube. While feeding the
machine do not stand higher than the bottom of the wheels.
Never service the machine before having switched off the ignition and remove spark
plug cap.
Never tilt the machine while the engine is still running.
Replace warning signs if damaged or not sufficiently legible.
1.3 Explanation of the warning signs
Sticker 1 : Watch out: danger! – read the users’ manual carefully – Danger of flying
chips – Keep a sufficient distance (12 meters) away – Risk of severe cuts
and wound – Risk of getting stuck.
Sticker 2 : Danger of flying chips – Keep a sufficient distance away from the machine
(12 meters).
Sticker 3 : Risk of severe cuts and wounds – Risk of getting crushed.
Sticker 4 : Read the users’ manual carefully – Wear safety goggles, ear protection
and safety gloves.
Sticker 5 : CE – sticker
Sticker 6 : Hot surface – Risk of burns