Visit us at
crlaurence.com
for international toll free information 3
A
C.R. LAURENCE Co., INC.
15.
Disconnect tools.
Disconnect tools from the power supply when not in use, before any
maintenance operation, and when changing accessories such as blades, bits, cutters, etc.
16.
Remove adjusting keys and spanners.
Get into the habit of checking that adjusting
keys and spanners have been removed from the machine before turning it on.
17.
Avoid unintentional starting.
Ensure switch is in "OFF" position before plugging in the machine.
18.
Use proper extension leads.
When the tool is used outdoors, use only extension
leads intended for outdoor use and labelled as such.
19.
Stay alert.
Concentrate on what you are doing, use common sense and do not
operate the tool when you are tired.
20.
Check that no part is damaged.
Before using a tool, make sure that it is in good working order.
Check the alignment and condition of moving parts, mounting and any other aspect that may
affect its operation. A guard or other part that is damaged should be properly repaired or replaced
by an authorized service center unless otherwise indicated in this instruction manual. Do not use
the tool if the switch does not turn on and off.
21.
Warning.
The use of any accessory or attachment other than one recommended in this
instruction manual may present a risk of personal injury.
22.
Have your tool repaired at an authorized service center.
This electric tool complies with
current safety rules. Repairs should only be carried out using original spare parts. Otherwise,
the user could expose themselves to considerable danger.
HeAlTH ADvICe
WARNING
When drilling, sanding, sawing, or grinding, dust particles will be produced. In some instances,
depending on the materials you are working with, this dust can be particularly harmful to you
(e.g. lead from old paint). You are advised to consider the risk associated with the materials you
are working with and to reduce the risk of exposure.
You should:
- Work in a well-ventilated area.
- Work with approved safety equipment, such as dust masks that are specially designed
to filter microscopic particles.
ADDITIONAl SAFeTY RUleS FOR YOUR SCReWDRIveR
1.
Do not expose to rain or water
.
2.
Do not drop, shake or strike the battery.
3.
Wear hearing protection when necessary. exposure to noise can cause hearing loss
.
4.
Cutting/ scraping blades and accessories can become very hot.
Take care when
changing or handling any bits or accessories.
5.
Recharge the battery only with the charger specified by the manufacturer
. A charger
that is suitable for one type of battery pack may create a risk of fire when used with another
battery pack.
6.
Use this power tool only with specially designed battery packs.
Use of any other
battery packs may create a risk of injury and fire.
