Visit us at
crlaurence.com
for international toll free information 4
A
C.R. LAURENCE Co., INC.
SAFETY INSTRUCTIONS
• AVOID UNINTENTIONAL STARTING. Ensure switch is off when plugging in the tool. Do not carry
a plugged-in tool with a finger on the switch.
• USE OUTDOOR EXTENSION LEADS. When tool is used outdoors, use only extension cords
intended for outdoor use.
• STAY ALERT. Watch what you are doing. Use common sense. Do not operate tool when you are tired.
• CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged
should be carefully checked to determine that it will operate properly and perform its intended
function. Check for alignment of moving parts, free running of moving parts, breakage of parts,
mounting of parts and any other conditions that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced. Do not use the tool if the switch does not
turn it on and off.
• WARNING The use of any accessory or attachment, other than those recommended in this
instruction manual, may present a risk of personal injury.
• HAVE YOUR TOOL REPAIRED BY A QUALIFIED PERSON. This electric tool is in accordance
with the relevant safety requirements. Repairs should only be carried out by qualified persons
using original spare parts, otherwise this may result in considerable danger to the user. The
following symbols are used throughout this manual:
Denotes risk of personal injury or damage to the tool.
ADDITONAL SAFETY INSTRUCTIONS FOR SANDERS
• Empty dust collection bag daily.
• Whenever possible, use a vacuum extractor for dust collection.
• Remove dust and other waste matter in a environmentally safe way.
ELECTRICAL SAFETY
Always check that the power supply corresponds to the
voltage on the rating plate.
!
!
