Visit us at
crlaurence.com
for international toll free information 4
A
C.R. LAURENCE Co., INC.
21.
Warning.
The use of any accessory or attachment, other than those recommended in
this instruction manual, may present a risk of personal injury.
22.
Have your tool repaired by a qualified person.
This electronic tool complies with relevant
safety requirements. Repairs should only be carried out by qualified persons using original spare
parts, otherwise this may result in considerable danger to the user. The following symbols are
used throughout this manual:
DENOTES RISK OF PERSONAL INJURY OR DAMAGE TO THE TOOL.
ADDITIONAL SAFETY
INSTRUCTIONS FOR SANDERS
ELECTRICAL SAFETY
Always check that the power supply corresponds to the
voltage on the rating plate.
MOUNTINg A SANDINg BELT
• Pull the clamping lever (6) out and turn it as far as it will go.
• Take a sanding belt of the required grit size and place it on the belt rollers (4).
• Make sure that the sanding belt is straight and centered on the rollers.
• Push the clamping lever (6) back.
• Switch the machine on to let the sanding belt run. With the machine switched on,
turn the belt centering knob (5) until the sanding belt runs straight.
The sanding belt must be fit firmly on the sanding pad and
should not come loose.
USINg THE DUST ExTRACTION OUTLET
In combination with the dust bag (7) or an external dust extractor, the dust extraction outlet (3)
keeps dust away from the sanding surface.
