45
CEB 1400 A1
GB
Before initial use
Remove all packaging materials and all transport securing devices
from the appliance.
NOTE
►
With initial use and for a brief period, a light odour accumu-
lation can occur. This is normal and completely harmless.
Appliance description
Insole connector plug
Insole (underside)
Trimming marks
Connection socket of the battery pack
Function indicator of the battery pack
Function switch for the heat settings
Battery pack
Mains power connector for power pack
Connector plugs for power adapter
Trimming the insoles to size
IMPORTANT
The heating element is located in the region of the toes.
►
Under no circumstances should you cut within the warning
symbol
,as this may damage the heating element.
♦
First, select the shoes in which you wish to wear the insoles
.
Bear in mind that the insoles
are ca. 4 mm thick and that
the better the shoe is insulated against cold, the longer you
can heat with a single battery charge.
♦
The trim marks
for diff erent shoe sizes are printed on the
bottom of the insoles and serve only as a guide for trimming.
♦
Initially, trim the insoles
slightly larger than needed. Deter-
mine the required actual size by using an existing insole.
♦
Cut along the trim marks
and adjust the insole
at the
heel and sides to your individual size.
NOTE
►
In the fi nal state the insole
should fi ll the entire foot bed
and it not be possible for it to move in the shoe.
IB_100082_CEB1400A1_LB1.indb 45
IB_100082_CEB1400A1_LB1.indb 45
20.06.14 10:38
20.06.14 10:38
