Crivit 303613, Instructions For Use Manual

Page: 9 / 58

11 GB
Adjusting the chin strap
The overall length of the chin strap is adjusted with loop.
Adjust the position of the chin strap using the strap divider.
Be sure the strap distributor is not bothersome. We recommend posi-
tioning it at the end of the ear pad (Fig. C).
Harness adjustment
You can use the rotary knob to adjust the width of the helmet to the
circumference of your head for an optimal fit. Turn the knob to the
left to increase the size of the headband and to the right to make the
headband narrower (figure D).
Headband height adjustment
The height of the headband system can be adjusted individually. 3
different height settings are available.
Loosen the comfort cushion at the back of the helmet that is secured
by hook-and-loop fastening. Pull the connecting pin of the headband
system out of its snap-in point on the layer of padding. You are now
able to attach the pin of the headband system higher or lower at the
other snap-in points. Press the pin into the snap-in point until you hear
and feel that it engages. (fig. F).
Removable ear pads
Pull the ear pads forcefully until the tabs on the ear pads are relea-
sed from the helmet. Open the chin strap and remove the ear pads.