Crivit 281538, Operating Instructions And Safety Instructions

Page: 63 / 66

Crivit REK 230 E3
English - 61

Ensure that the ventilation slots are not covered and a sufficient amount of air is able to
circulate.

In 230 V mode: Check the position of the temperature control switch [6] on the front of the cool
box and turn this clockwise to increase the cooling output if necessary.
11. Environmental and waste disposal information
Devices marked with this symbol are subject to European Directive 2012/19/EU.
Electrical and electronic devices may not be put in the household waste, but must
be disposed of via designated public disposal centres. By properly disposing of
the old device, you can avoid environmental damage and hazards to health.
Further information regarding proper disposal of the old device can be obtained
from your local authority or the shop where you purchased the device.
Make sure the packaging is disposed of in an environmentally-friendly manner.
Cardboard packaging can be put out for waste-paper collection or taken to public
collection points for recycling. The plastic packaging used for your device is
collected by your local waste management company and disposed of in an
environmentally-friendly manner.
12. Marks of conformity
The cool box complies with the fundamental requirements and other relevant
regulations of the EMV Directive 2014/30/EU, the Low-Voltage Directive
2014/35/EU, the EMC Directive 2009/125/EC and the RoHS Directive
2011/65/EU.
In order to obtain the full EU Declaration of Conformity, send an e-mail to the
following email address: ce@targa.de
13. Food contact authenticity
This icon indicates products that have been tested in relation to their physical and
chemical composition and that in accordance with EC 1935/2004 have been
regarded as harmless to health in terms of contact with foodstuffs.