26
© 2021 All rights reserved. Data subject to change without notice.
RDM - Operation Manual
Rev. B | 2021.12
choose Auto on. The RDM will sample existing traffic on the network to
determine the correct baud rate. This is useful if the RDM gets lots of framing
errors. It will automatically change the baud rate until it stops getting the errors.
If Auto is turned off, the RDM will be locked into whatever baud rate has been
selected.
NOTE:
The FCS baud rate and the RDM baud rate (and all devices on the FCS
LAN network) must be the same for the system to work.
6.7 Mask Lines
NOTE: The mask lines functionality is only applicable to the FCS model
with 4 or less channels. If connected to the other FCS models, the display
configuration of the channels should be done using the FCS.
The mask lines function masks the line, not the channel.
The RDM display can be configured to show or not show each of the 4
channels’ data. The default setting is to display all channels. When connected
to the FCS, to display selected channels, in the Basic Menu (passcode 1001),
press the ARROW keys to scroll through the menu and select Mask Channels.
Press E to select. Use the ARROW keys to choose SHOW or HIDE the
information for each channel.
Press E to save the entry and exit the screen.