CrissAir CCB 04 G5, Installation - Use - Maintenance

Page: 17 / 112

17
EN
Important
• use of the appliance produces heat
and moisture in the room where it is
installed. Make sure the kitchen is
VXႈFLHQWO\ YHQWLODWHG NHHS QDWXUDO
ventilation holes open or install
mechanical ventilation devices (such
as a hood).
• Prolonged use of the appliance may
require additional ventilation, such as
opening a window.
• RQ ÀRRUV ZLWK WKHUPRHOHFWULF
protection do not keep the ignite
button pushed for more than 15
seconds. If the burner has not ignited
after 15 seconds, open the door of
the room and wait at least one minute
before making a further attempt.
• RQ ÀRRUV ZLWKRXW SURWHFWLRQ VKRXOG
WKH EXUQHU ÀDPH JR RXW FORVH WKH
corresponding gas cock and wait at
least on minute before making any
attempt to ignite it.
Electrical plates / Vitroceramic
heating element
)LJD5RWDWHWKHNQREWRZDUGV
the position required for cooking
and bear in mind that the higher the
number, the higher the heat output.
See table “use of electrical plates”/
heatin elements vitroceramic. The pilot
light signals that the plate is “on”.
Some types of pilot lights will
maintain some slight luminescence
even after disconnection. That is
quite normal.
N.B.: When using electrical plates/
heating elements vitroceramic, we
UHFRPPHQGÀDWERWWRPUHFLSLHQWVZLWK
a diameter equal or slightly larger than
that of the plate itself.
• DYRLGOLTXLGRYHUÀRZ7KHUHIRUHDIWHU
boiling or heating liquids, reduce the
KHDWRXWSXW
• do not leave the electrical plates on
ZLWKHPSW\SRWVDQGSDQV
• ZKHQ FRRNLQJ LV ¿QLVKHG URWDWH
the knob back into closing and/or
disconnected position.
In the event of even a slight fracture
on the cooking vitroceramic surface,
disconnect the electric power supply
immediately.
'212767$5($77+(+$/2*(1
LAMP.
¿VK [
wok ‘
fast ‘
semifast ‘
DX[LOLDU\ Ø 10-14
*with reduction grid
GAS
)LJ