4
Yellow wire
- Parking brake switch (12 volt when vehicle is in the parking state)
WARNING
:
Observe polarity when connecting the cables .the cable must not be
reversed of modified.
Figure 3
4. Signal Inputs
The signal input connections for the system include:
Rear Camera:
Plug the RJ 11 camera cable end into the control box
AVin-1 location, route the cable to the rear camera and plug the 4-pin
connector into camera 4 pin connector. Users can see the rearview camera image
when the car is shifted into reverse.
5. Controls and Indicators
5
Figure 4
Figure 3 And Figure 4 shows the function of rear view mirror.
A: 4.5" LCD panel ;
B: Rearview Mirror ;
C: SW1 ;
D: SW2 ;
E: LCD Brightness Control ;
F: Power Indicator (Red when Power is on) ;
G: Internal Speaker
;
H: Volume control ;
I: Internal microphone .
SW1 AND SW 2
1). Vehicle Reversing:
No function
2). Vehicle Driving:
SW1: When the vehicle is parking, press the button will turn on or
off the display monitor.
SW2: Press the button will display or off the image from the
rearview camera.
6. Operation
1) How to turn the Rearview Mirror on/off
A
.
The system is automatically on when ignition is turned on.
B
.
The system turns off when ignition is turned off.
4
