13
OPERATING INSTRUCTIONS
EMERGENCY OVERRIDE & DISARM
If you have lost the transmitter or it stops working for any reason and the Alarm is armed, you will have to
perform and Emergency Override to Disarm the Alarm. Open the door with the key, (alarm will sound). Turn
the ignition on and press the override/program button 4-5 seconds (until siren stops). The Alarm will disarm.
VALET MODE (Solid LED on Dash)
To disable the Alarm system for vehicle service or otherwise, turn the ignition on and press the
override/program button 4-5 seconds until the dash LED turns on solid and you hear (1) siren chirp. Repeat
the process to exit VALET mode and the system will chirp (2) times and the LED will turn off. Lock Unlock and
AUX features will still operate in when in VALET mode.
PRIOR INTRUSION ALERT
If the system was tripped in your absence, the dash LED will be flashing rapidly. When the system is
disarmed you will hear 4 chirps and flashes. Carefully inspect your vehicle.
OPEN ZONE ALERT & BYPASS
If the system detects a faulty or open zone (Door left open) when the system is ACTIVELY ARMED, the siren
and horn will chirp 3 times along with 3 light flashes. The faulty zone will be automatically bypassed.
IGNITION-CONTROLLED DOORLOCKS
If this feature is enabled, the doors will automatically lock when the ignition is turned on and will unlock when
the ignition is turned off. This feature can be programmed ON, OFF (option #3).
PRE-WARNING SHOCK PROTECTION & SENSOR ADJUSTMENT
If a low-level shock to the vehicle is detected, pre-warning protection will activate sounding 5 quick siren chirps
and 1 light flash. If a hard impact is detected the shock sensor should trip the alarm system. Once it is
mounted, adjust the sensor as needed by turning the adjustment screw clockwise to increase or counter-
clockwise to decrease the sensitivity. The sensor is also equipped with 2 small indicator lights to ease the
adjustment process. Green light = Pre-warning disturbance (5 siren chirps). Red light = A full alarm trigger.
