background image

 

OPERATING INSTRUCTIONS 

 

ARM / DISARM WITH IGNITION ON (PROGRAM OPTION #15) 

This feature allows the  system to be armed  or disarmed  while the ignition is  in the  ON  position or vehicle is 
running.  The feature is disabled by default and should not be used under normal operating conditions.  On an 
installation with an add-on remote start module, this option can be enabled to allow the system to be armed or 
disarmed  when  the  vehicle  has  been  remote  started  (Ignition  will  be  ON).    Note  that  you  cannot  use  this 
feature if you are also using the Full-time carjack protection.  If you add a remote start and the Ignition turns 
on, a Carjack trigger will be activated. 

 
ACTIVE RE-ARMING (FAIL-SAFE PROTECTION) 

Active Re-arming means that the system will re-arm itself 30 seconds after disarmed with the transmitter if a 
door has not yet been opened.  This is handy if the vehicle is accidentally disarmed (via the transmitter in your 
pocket)  without  you knowing it.  This feature can  also be turned off in programming option  (6). Active  rearm 
feature is disabled if you also have dome light illumination installed. 

 
IGNITION-CONTROLLED DOORLOCKS 

The doors will automatically lock when the ignition is turned on and will unlock when the ignition is turned off.  
This  feature  can  be  programmed  on,  off,  or  to  lock  the  doors  only.   

  Doors  will  not  lock  if  they  are  open  to 

prevent locking the keys in. 

 
TRUNK / HATCH POP (REMOTE AUX. OUTPUT 1, OPTIONAL) 

To pop the trunk, press and release the Trunk button on the transmitter. 

If the system is armed, it may or may 

not trip the alarm system  when opening the trunk depending on  programming option (10). See programming 
option chart for more details. 

 
2

nd

 AUX. OUTPUT (REMOTE AUX. OUTPUT 2) 

To activate the Second auxiliary output  Press and hold the Silent Button for 3 seconds to activate AUX. channel #2. 

 

DOME LIGHT ILLUMINATION (OPTIONAL) 

This  feature  turns  on  the  vehicles  dome  light  upon  disarm  for  30  seconds  or  until  the  key  is  inserted  and 
turned on.  This will provide illuminated entry to your vehicle at night or in dimly lit areas for added safety and 
security.    Note  that  dome  light  illumination  will  deactivate  the  active  rearm  feature  if  programmed  for  active 
rearm. 

Summary of Contents for Fortress FS-30















Reviews: