2
TABLE OF CONTENTS
Pre-Installation & Component Mounting……………………..…………………………………………………2-3
Wiring……..……………………………………………………………………………………………………..…….3-4
Power Door Lock Wiring……………………………………………………….………..……………….…...……4-5
Negative Trigger Door Locks………………………….……………………...…......………………………………6
Positive Trigger Door Locks………..………………………….…………………………….…………......……….7
5-Wire Reverse Polarity Trigger Door Locks ………………………….…………………………….…………..8
After Market Door Locks…………….……………………………......................................................................9
1-Wire Door Locks……..……………………………………...………………………………………….……….10-12
Wiring Diagram………………………………………………………………………………………………..………13
Transmitter Programming………………………………………………………………………………..…………14
Operating Instructions………………………..…………………………………………………………..………....15
PRE-INSTALLATION CONSIDERATIONS
BEFORE BEGINNING
, check all vehicle manufacturer cautions and warnings regarding electrical service (AIR
BAGS, ABS BRAKES, ENGINE / BODY COMPUTER AND BATTERY).
PLAN OUT YOUR INSTALLATION
and determine most suitable locations for all components to be placed.
These components include: the module itself, valet/program button and possible relays. Allow enough wire to
create a service loop with strain relief, should servicing be required.
DAMAGE
resulting from incorrect installation or failure to follow guidelines stated in this book will not be
covered under warranty and subject to repair or replacement charges.
USE A VOLT/OHM METER
to test and locate all connections. Test Lights can damage a vehicle’s computer
systems.
DO NOT ROUTE ANY WIRING THAT MAY BECOME ENTANGLED
with brake, and gas pedals, steering
column, or any other moving parts in the vehicle.
