7
PRE-WARN
TRUNK POP
OPERATING INSTRUCTIONS - ALARM
Pre-Warning Shock Protection
The Pre-warning (warn-away) feature will activate when a low-level shock or vibration
detected by the system’s shock sensor. The alarm will chirp the siren 5 times and flash
the lights once to help deter any further tampering with the vehicle. The pager/remote
will vibrate and beep (1).
Passive Arming Mode: (Programmable)
Passive (automatic) arming occurs 30 seconds after the ignition is turned off and the last
door is closed. Upon closing the last door, the unit will flash the lights twice and LED will
be flashing rapidly to confirm passive countdown. If a door is reopened within the 30-
second period, the countdown stops and begins again when the door is closed. Passive
arming provides failsafe protection in case you forget to arm the system.
Passive Locking: (Programmable)
The CS2014DP-FM/FM system can be programmed to passively lock the doors when the system passively
arms. The default setting is OFF because passive locking increases the risk of locking the keys in the vehicle.
When the system arms/locks passively, without you pressing the remote.
Trunk/Hatch Pop (Optional, Remote AUX. Output 1)
This feature is designed to interface with existing Factory power trunk or power hatch
release systems and may require additional parts and/or labor charges. Press and
release Button #3 (Trunk) on the transmitter to pop/open the trunk/hatch. If the system is
armed, it will also disarm when button #3 is pressed (programmable).
Remote AUX. Output 2 (Optional, Requires special programming)
This system contains a second auxiliary output to activate other accessories or devices.
To activate the second Auxiliary Output
:
Press button #2 and #3 on the transmitter for
more than 2 seconds. This momentary output will stay active as long as the remote
button is held down. There is no LCD/pager confirmation for Aux. 2 output.
Dome Light Illumination (Optional)
This feature will turn on the vehicle’s dome light upon disarming for 30 seconds or until the key is inserted and
turned on. This will provide illuminated entry to your vehicle in dimly lit areas for safety and security.
