WIRING
GRAY WIRE: (-) AUX REMOTE OUTPUT 1 (Optional, may
require a relay)
Connect to the Negative trunk release circuit or to the activation circuit of an auxiliary module or device. If the circuit
re12V, then a relay is required. RELAY WIRING: Connect the Gray wire to terminal 85, connect relay terminals
86 and 87 to +12V constant power. Connect terminal 30 of the relay to the +12V positive device/circuit to be activated.
WHITE/RED WIRE: (-) AUX REMOTE OUTPUT 2 (Optional, may require a relay)
This wire connects the same way as Remote Output 1 see GRAY WIRE above.
BLACK/WHITE WIRE: (-) DOME LIGHT ILLUMINATION OUTPUT (Optional, may require a relay)
Negative Dome Light System:
Connect directly to dome light activation circuit.
Positive Dome Light System:
Connects to terminal 85 of a relay. Connect terminals 86 & 87 to +12V Constant.
Connect terminal 30 to the dome light activation circuit.
NOTE: A relay may still be required on Negative Dome Light Systems if there are many dome lights to turn on.
(Minivans, SUV’s & Luxury vehicles) Follow the relay wiring steps for positive, but connect terminal 87 to Ground.
BROWN/WHITE WIRE: (-) HORN PULSE / CHIRP OUTPUT (Optional, may require a relay)
Connect to the Negative Horn Trigger wire usually located near the steering column. If the vehicle horn circuit requires
+12V, then a relay is required. RELAY WIRING: Connect the Brown/White wire to terminal 85, connect relay terminals
86 and 87 to +12V constant power. Connect terminal 30 of the relay to the +12V positive device/circuit to be activated.
BLUE/WHITE WIRE: (-) PASSENGER(S) DOOR UNLOCK OUTPUT (Optional, requires relay)
Connects to unlock circuit for passenger door(s) when using separate driver’s door unlock option. See SEPARATE
DRIVER’S DOOR UNLOCK WIRING for configuration options.
2 PIN PLUG (BLUE): PROGRAM/OVERRIDE PUSH BUTTON
SHOCK SENSOR: The sensor supplied with
this system does not require any additional
wiring. Simply mount the sensor in a suitable
location, plug it in, and adjust the sensitivity.
2 PIN PLUG (RED): LED INDICATOR (RED FLASHING LIGHT)
4 PIN SENSOR PLUG: WHITE Wire: Negative Pre-Warning,
BLUE Wire: Negative Trigger,
BLACK Wire: Sensor
Ground,
RED Wire 12V Power
POWER DOOR LOCK WIRING
DETERMINING DOOR LOCK TYPE:
We recommend determining the
type of locking system the vehicle has before connecting any wires.
Incorrect connection could result in damage to the alarm and/or the
vehicle’s locking system. There are several types of door lock systems
in today’s vehicles. See the list on the next page of many types of
common door locking systems. This list serves as a guide only and
your vehicle may differ.
3 PIN DOOR LOCK PLUG (Optional):
GREEN:
(-) Negative pulse for LOCK
RED:
+12V Coil Power for using relays.
BLUE:
(-) Negative pulse for UNLOCK
HINT: Relays are required for all types
of lock systems EXCEPT for Negative.
