24
DATA PORT
This unit includes DP Technology that will allow you to directly Plug-In our Data Port.
There are 3 types of Protocol, ADS
iDatalink series, Fortin series and d2d series modules. The default is set for Fortin series Protocol. Please refer to
Databus module manual for detail instructions. The Data Port Protocol must be programmed for the correct module.
See Option # 5 for programming Data Port
Some vehicles require a Databus Module to Bypass the factory Immobilizer and operate the keyless entry
Databus modules are used to communicate with the vehicles computer at the OBD2 Data connector or Canbus
wires. This reduces installation error. Crimestopper Systems with DP Series have a direct Data Port Plug-In for the
Databus bypass module. This eliminates conventional wiring between the Alarm/Remote Starter and the bypass
interface module.
PC SETUP Optional Cable Required
You can change all options in the Program menu by using a PC. You can run program directly from CD or
copy the AM351_.exe file on your PC to run program.
To Run Program:
1
、
The remote start module must be connected to power and ground to run program.
2
、
Plug in programming cable to spare USB connector on your PC and to the remote start module (see wiring
diagram).
3
、
Click on the AM351_ .exe file to load program. You will see the PC Programming Menu on next page.
4
、
Selected the correct COM port.
5
、
Click Request button, the program will read the current settings of the system.
6
、
Change any options in Programming Menu to desired level.
7
、
Click Apply button to Finalize Programming.
8
、
Click Default button to restore all options back to factory Default value.
