background image

 

CONVENIENCE AND SAFETY FEATURES

 

KEYLESS ENTRY (POWER DOOR LOCK CONTROL, Optional) 

This  system  enables  you  to  remotely  lock  and  unlock  the  vehicle’s  doors  (if  equipped  with  power  locks)  via  remote 
control for safety and convenience.  Note: This feature may require extra labor and/or parts to install.  Press the Lock 
or Unlock transmitter button as you leave or come near the vehicle.  Parking lights will flash once for lock and twice for 
unlock.  If vehicle is running by the remote start system, the lights will flash, but return back to solid. 

 

AUTO LOCK/UNLOCK (Improved) 

The Auto Lock feature controls whether the doors will automatically lock/unlock on your vehicle when driving or with 
turning the Ignition ON/OFF.  If the Auto Lock feature is turned on, and your system is in “Tach” mode, then the doors 
should automatically lock as the engine RPM increase (driving).  If the Auto Lock feature is turned on, and your system 
is in “Smart Tachless” mode, then the doors will lock a few seconds after the Ignition is turned on.  When the Auto Lock 
feature is turned on, the system will always unlock the doors when the Ignition is turned off.  With this feature turned 
OFF, the system will not automatically lock or unlock the vehicle.  See your installer for programming information on 
this feature.

 

DOOR LOCK NOTE:

  

If your system has been setup with an optional starter kill relay, but you do not have power door locks, 

note the following: The lock and unlock buttons on the remote control must still be utilized to operate the Starter disable

 

REMOTE PANIC (Used only with Optional HORN HONK feature installation) 

For personal safety this unit now includes a panic feature.  To sound the vehicle car horn, press the Lock Button on the 
remote for more than  2 seconds.   The  vehicle horn will honk  along with flashing  parking lamps for 1 minute. Reset 
Remote Panic by pressing either the lock or unlock button.  See next section for Horn Honk information. 

 

HORN CHIRP/HONK OUTPUT (Optional: with Horn connection & programming) 

This feature, if installed, will provide audible confirmation chirps from the factory horn for lock and unlock. When using 
this feature, pressing the Lock/Unlock button a 2

nd

 time within 3-7 seconds or single press lock/unlock will provide a 

horn chirp for audible confirmation.  The system can also be programmed to provide 3 chirps when a remote start is 
requested using the remote.  Note: Horn honk/chirp feature may require extra labor and/or parts to install. 

 

REMOTE TRUNK RELEASE OR DOMELIGHT ILLUMINATION (Optional) 

This  CoolStart  system  includes  an  output  that  can  be  programmed  to  remotely  release  a  factory  electronic  trunk  or 
illuminate the interior light when you unlock your vehicle for lighted entry at night.  If you have the optional trunk pop 
installed, simply press and release the Trunk Button #3 on the transmitter or if option # 6 is turned on you must press 
Button # 3 twice within 3 seconds, to remotely open trunk. If your system is programmed for Dome Light illumination, 
then it will work automatically lighting the dome light for 30 seconds when you unlock your vehicle via the remote.  The 
dome light will turn off after 30 seconds, or turning the key on (whichever comes first).  The trunk Pop or Dome Light 
Illumination may require extra labor and/or parts to install. 

Summary of Contents for Cool Start RS-1405DP















Reviews: