COM-CAM1
WIRING DIAGRAM
CAMERA
STANDARD CONNECTION
COMMERCIAL CONNECTION
TO
MONITOR
GROUND
12V REVERSE/ACC
BLUE
CUT LOOP FOR
NON-MIRROR IMAGE
YELLOW
WHITE
RED
BLACK
CUT LOOP TO
DISPLAY GRID LINE
CAMERA
GREEN
OR
STANDARD CONNECTION
COMMERCIAL CONNECTION
TO
MONITOR
GROUND
12V REVERSE/ACC
YELLOW
WHITE
RED
BLACK
OR
RED – ACCESSORY (+)/ REVERSE TRIGGER – This will be connected to the vehicle’s accessory wire or reverse light trigger
wire. This wire powers the camera. Some reverse trigger wires are not strong enough to power a camera, this is why we always
recommend connecting to an 12V accessory wire.
BLACK – GROUND – This wire needs to be grounded to a clean, paint free metal surface of the vehicle.
YELLOW RCA - VIDEO - Connect to monitor to display camera video image when activated.
WHITE RCA - AUDIO - Connect to monitor for audio output picked up by cameras integrated microphone.
GREEN - PARKING LINES - DO NOT CUT to not display parking assist lines. CUT to display parking assist lines.
BLUE - CAMERA ORIENTATION - DO NOT CUT for normal rear mount installation. CUT for front mount installation.
Cut the GREEN loop
to turn on the parking
assist grid lines.
If using the camera as front
camera, cut the BLUE loop to
get non-mirror image.
If using the camera as rear
view camera, do not cut the
blue loop.
