Programmable Features
Turn ignition “on” then “off”. Press and release valet button 5 times. Unit will enter feature set-up. Press valet button equal to the feature
number you wish to change.
FEATURE#
DEFAULT
LOCK
UNLOCK
Feature #1 Current Sensing
OFF
ON
OFF
Feature #2 3 or 210 Second Current Sensing Delay
3
210
3
Feature #3 30 or 60 Second Alarm Duration
60
60
30
Feature #4 3 or 45 Second Arming Delay
3
45
Feature #5 Last Door Arming
OFF
ONOFF
Feature #6 Automatic Rearming
OFF
ON
OFF
Feature #7 Disarm Upon Trunk Release
ON
ON
OFF
Feature #8 Parking Lights Upon Disarm
ON
ON
OFF
Feature #9 Doors Lock With Ignition “ON”
ON
ON
OFF
Feature #10 Ignition OFF Unlock #1
ON
ON
OFF
Feature #11 Ignition OFF Unlock #2
ON
ON
OFF
Feature #12 Open Door Bypass To The Previous Three Features
ON
ON
OFF
Feature #13 Doors Lock With Last Door Arming
OFF
ON
OFF
Feature #14 Automatic Rearming Lock
OFF
ON
OFF
Feature #15. Door Lock Unlock Pulse Duration
.8
3
.8
Feature #16 Double Unlock Pulse
OFF
ON
OFF
Feature #17 28 Second Lock Pulse
OFF
ON
OFF
Feature #18 Ignition Vehicle Recovery
OFF
ON
OFF
Feature #19 Door Activated Vehicle Recovery
OFF
ON
OFF
Feature #20 Transmitter Activated Vehicle Recovery
OFF
ON
OFF
Feature #21 Confirmation Chirp
ON
ON
OFF
Feature #22 Steady Siren / Pulse horn
STEADY
PULSED
STEADY
Feature #23 Loud Or Soft Confirmation Chirps
SOFT
LOUD
SOFT
Feature #24 One Or Two Button Transmitter Operation
TWO
ONE
TWO
Feature #25 10 Or 20 Minute Engine Run Time
10
20
10
Feature #26 Steady Or Flashing Lights
STEADY
FLASH
STEADY
Feature #27 Gas Or Diesel Engine
GAS
DIESEL
GAS
Feature #28 Extended Crank Time
MIN.7
NOTE 1
MIN.7
Feature #29 Tachless Or Tach Operation
TACH
LESS
TACH
Feature #30 Preactivation
ON
OFF
ON
NOTE 1: Each time you press lock button the extended start will advance to the next highest base start time (Two Chirps 1.25 SEC.
Three Chirps, 1.75SEC, Four Chirps 2.5 SEC.).
Total System Reset
Method # 1: Preset the FPM-1 to default settings, access feature set-up and reset.
